Monitor charge of any 12V battery.
This monitor confirms that the vehicle loading system is working correctly. Checks the status of each 12-V battery.
LENGTH: 6 inches / 15 cm
IN & OUTPUT: SAE 2-pin
CABLE: SPT-2W 16 AWG (1.32mm2)
USE: Suitable for use at very low temperatures down to -40 ° C / -40 ° F, cable remains flexible at temperatures below “freezing point”
OTHER: Fully enclosed electronic module with 4 LEDs, SAE charging connector with waterproof rubber cover
OPERATION: Two automatic modes - checking the battery charge level (one flashing LED) and system test during charging (arrow mode)
VEHICLE STORAGE: Four LEDs show the voltage range, from full to empty, of all 12V batteries, including higher voltage AGM batteries (fourth √√ led ≥ 12.7 V), the LED corresponding to the charge level flashes every 3 seconds (long term use below 0.2mA)
VEHICLE RUNNING: The LED arrow mode is enabled when the charging voltage is at least 13.5V (√ green LED) or within the ideal range of more than 14V (√√ green LED)
Excluding VAT and transport costs