Monitor charge of a big 12V battery.
This monitor confirms that the vehicle loading system is working correctly. Checks the status of a larger 12-V battery.
LENGTH: 40 inches / 100 cm
Battery connector (INPUT): 5/16” (M8)
Charge connector (OUTPUT): SAE 2-pin
CABLE: SPT-2W 16 AWG (1.32mm2)
FUSE: 15 Amp
USE: Suitable for use at very low temperatures down to -40 ° C / -40 ° F, cable remains flexible at temperatures below “freezing point”
OTHER: Fully enclosed electronic module with 4 LEDs, SAE charging connector with waterproof rubber cover
OPERATION: Two automatic modes - checking the battery charge level (one flashing LED) and system test during charging (arrow mode)
VEHICLE STORAGE: Four LEDs show the voltage range, from full to empty, of all 12V batteries, including higher voltage AGM batteries (fourth √√ led ≥ 12.7 V), the LED corresponding to the charge level flashes every 3 seconds (long term use below 0.2mA)
VEHICLE RUNNING: The LED arrow mode is enabled when the charging voltage is at least 13.5V (√ green LED) or within the ideal range of more than 14V (√√ green LED)
Excluding VAT and transport costs